Compliance Recertification Application 2009

CRA-2009 Main | References | CFR Index | Search CRA-2009 | About

WIPP Performance Assessment

WIPP Performance Assessment. 1991. Preliminary Comparison with 40 CFR Part 191, Subpart B, for the Waste Isolation Pilot Plant, December 1991. 4 vols. SAND91-0893/1–4. Albuquerque: Sandia National Laboratories.

Appendix MASS: Performance Assessment Modeling Assumptions
- Subsection MASS-15.4, Subsidence Caused by Potash Mining in the Culebra
- Subsection MASS-22.0, References

WIPP Performance Assessment. 1991. Preliminary Comparison with 40 CFR Part 191, Subpart B, for the Waste Isolation Pilot Plant, December 1991, Volume I: Methodology and Results. SAND91-0893/1. Sandia National Laboratories, WIPP Performance Assessment Department, Albuquerque, NM. ERMS 226404.

Appendix SCR: Feature, Event, and Process Screening for PA
- Subsection SCR-7.0, References

WIPP Performance Assessment. 1993. Preliminary Performance Assessment for the Waste Isolation Pilot Plant, December 1992, Volume 4: Uncertainty and Sensitivity Analyses for 40 CFR 191, Subpart B. SAND92-0700/4. UC-721. ERMS 223599. Albuquerque: Sandia National Laboratories.

Appendix MASS: Performance Assessment Modeling Assumptions
- Subsection MASS-5.1, Historical Context of the Repository Model
- Subsection MASS-13.4, Flow in the DRZ
- Subsection MASS-22.0, References
Appendix SCR: Feature, Event, and Process Screening for PA
- Subsection SCR-6.5.5.3.3, Screening Argument
- Subsection SCR-7.0, References

WIPP Performance Assessment. 1996. User’s Manual for LHS, Version 2.41. ERMS 230732. Albuquerque: Sandia National Laboratories.

Appendix PA: Performance Assessment
- Subsection PA-6.4, Generation of Latin Hypercube Samples
- Subsection PA-10.0, References

WIPP Performance Assessment. 1997a. User’s Manual for NUTS, Version 2.05. ERMS 246002. Albuquerque: Sandia National Laboratories.

Appendix PA: Performance Assessment
- Subsection PA-4.3.6, Numerical Solution
- Subsection PA-4.3.7, Additional Information
- Subsection PA-10.0, References

WIPP Performance Assessment. 1997b. User’s Manual for SECOTP2D, Version 1.41. ERMS 245734. Albuquerque: Sandia National Laboratories.

Appendix PA: Performance Assessment
- Subsection PA-4.9, Radionuclide Transport in the Culebra Dolomite
- Subsection PA-4.9.1.1, Advective Transport in Fractures
- Subsection PA-4.9.1.2, Diffusive Transport in the Matrix
- Subsection PA-4.9.2, Numerical Solution
- Subsection PA-4.9.2.3, Fracture-Matrix Coupling
- Subsection PA-4.9.3, Additional Information
- Subsection PA-10.0, References

WIPP Performance Assessment. 1998b. Design Document for PANEL (Version 4.00). ERMS 52169. Carlsbad, NM: Sandia National Laboratories.

Appendix PA: Performance Assessment
- Subsection PA-4.4.2, Numerical Solution
- Subsection PA-10.0, References

WIPP Performance Assessment. 1998a. User’s Manual for FMT (Version 2.40). ERMS 243037. Carlsbad, NM: Sandia National Laboratories.

Appendix PA: Performance Assessment
- Subsection PA-4.3.2, Calculation of Maximum Concentration ST( Br, Ox, El)
- Subsection PA-10.0, References

WIPP Performance Assessment. 2003g. Design Document for CUTTINGS (Version 5.10).

Appendix PA: Performance Assessment
- Subsection PA-4.6.5, Additional Information
- Subsection PA-10.0, References

WIPP Performance Assessment. 2003a. Design Document for DRSPALL Version 1.00 (Version 1.10, September). ERMS 529878. Carlsbad, NM: Sandia National Laboratories.

Appendix MASS: Performance Assessment Modeling Assumptions
- Subsection MASS-16.1.1, Historical Context of Cuttings, Cavings, and Spallings Models
- Subsection MASS-16.1.3, Mechanistic Model for Spall
- Subsection MASS-22.0, References
Appendix PA: Performance Assessment
- Subsection PA-4.6.2.2, Repository Flow Model
- Subsection PA-4.6.2.3.1, Flow Prior to Penetration
- Subsection PA-10.0, References

WIPP Performance Assessment. 2003a. Design Document/User’s Manual for CCDFGF (Version 5.00). ERMS 530471. Carlsbad, NM: Sandia National Laboratories.

Appendix PA: Performance Assessment
- Subsection PA-3.11, CCDF Construction
- Subsection PA-4.1, Results for Specific Futures
- Subsection PA-6.8Computation, of Releases
- Subsection PA-6.8.2.2, Construction of Spallings Releases
- Subsection PA-6.8.2.3, Construction of DBRs
- Subsection PA-6.8.3, Radionuclide Transport Through the Culebra
- Subsection PA-10.0, References

WIPP Performance Assessment. 2003c. User’s Manual for CUTTINGS_S, Version 5.10. ERMS 532340. Albuquerque: Sandia National Laboratories.

Appendix PA: Performance Assessment
- Subsection PA-4.5, Cuttings and Cavings to Surface: CUTTINGS_S
- Subsection PA-4.5.3, Additional Information
- Subsection PA-10.0, References

WIPP Performance Assessment. 2003f. User’s Manual for DRSPALL Version 1.00. ERMS 524780. Carlsbad, NM: Sandia National Laboratories.

Appendix PA: Performance Assessment
- Subsection PA-4.6.5, Additional Information
- Subsection PA-10.0, References

WIPP Performance Assessment. 2003b. User’s Manual for PANEL Version 4.02. ERMS 526652. Carlsbad, NM: Sandia National Laboratories.

Appendix PA: Performance Assessment
- Subsection PA-4.4.4, Additional Information
- Subsection PA-6.6, Construction of CCDFs
- Subsection PA-6.8.2.3, Construction of DBRs
- Subsection PA-10.0, References

WIPP Performance Assessment. 2003b. Verification and Validation Plan and Validation Document for DRSPALL Version 1.00 (Version 1.00, September). ERMS 524782. Carlsbad, NM: Sandia National Laboratories.

Appendix MASS: Performance Assessment Modeling Assumptions
- Subsection MASS-16.1.3, Mechanistic Model for Spall
- Subsection MASS-22.0, References
Appendix PA: Performance Assessment
- Subsection PA-4.6.2.1.1, Wellbore Initial Conditions
- Subsection PA-10.0, References